1.Setting things up

2.Configuring the Domotz Agent

The next step is to configure your Domotz Agent. To do so, make sure you’ve downloaded an installed the Domotz App on your mobile device. Then simply tap on the drawer menu button and tap on “Find New Agents” towards the bottom of the menu. This will automatically detect any new Domotz Agents on your network, as long as your mobile device is connected to the same network as your Domotz Agent. You can then proceed to configuring your Domotz Agent following the steps below on your mobile device without having to know the IP address of your Domotz Agent.

Alternatively, you can type in the IP address and port shown in the Domotz App in a web browser on your PC. For example, if the IP address was 192.168.1.39 you type 192.168.1.39:3000 and then hit enter. You should now see the Domotz Agent webpage.

At this point, you’ll be asked to create an account if you don’t already have one. Please follow the on-screen instructions.

domotz_agent_setup_1

domotz_agent_setup_2

domotz_agent_setup_3

Once you’ve created your account, the Domotz Agent will proceed to scanning your network for devices. This will take anything from a few minutes up to 15 minutes depending on how many devices you have on your network.

domotz_agent_setup_4

domotz_agent_setup_5

This also means that it’ll take some time before all of your devices appears in the Domotz App on your smartphone or tablet. Once the scan has finished, click/tap Done to continue the to the Domotz Agent web UI.

Suggest Edit